Bending tool for sheet-bending presses with clamping system Promecam.

Bending tool for sheet-bending presses with clamping system Promecam.

 

Bending tool Promecam  (Euro Style) is considered the most widespread bending system in the world, it is used in the majority of press brakes on the European market. We can ensure the supply of any tooling positions for press brakes that are equipped with Promecam (Euro Style) system.  We guarantee high quality, fast delivery and a wide range of tooling. We also offer to supply the following: Promecam (Euro Style) system tooling of any standard or specialised forms depending on customer’s specifications (could be based on specialised blueprints), bending punches and dies, die holders, standard length tools(415 mm and 835mm) and sectionalized tools, radius punches and inserts and many more…

 

 

Promecam is used in tooling by the following manufacturers : Amada, Atlantic/Haco, Baykal, Durma, Gasparini, Vimercati, Kingsland, Fratellifarina, Colly, Itek, Tabama, Smd Adira, Warcom, Denermakina, Yangli, Jordi, Ysd, Cmu, Bystronic-Hammerle, Ironmac, Femas, Peliant Imal, Mecos, Schiavy, Ermaksan, Guifil, Colgar, Edwardpearson, Hesse, Teda, Jeanperrot, Knuth

 

Benging tool is made of C50 steel and 42CrMo4 steel which is tempered to increase tool’s lifetime.

 

We can suggest 3 ways of punch clamping :

 

1. Clamping the tool using standard clamps, included in the standard press equipment set.

 

2. Clamping using the Easy Clamp products which allow you to :

 

  • reduce reinstallation time caused by the changing of the tool
  • install and remove the tool from below, without having to drag it over the whole press

 

3. Clamping using the Expert Clamp products, which have the following benefits:

 

  • significant reduction of the reinstallation time, caused by the changing of the tool.
  • the possibility to install and remove the tool from below, without having to drag it over the whole press.
  • enables to install the tool positively and negatively, that is from both sides of the punch holder, allowing the operator to clamp in a more secure and firm way.
  • eliminates the need for additional adjustment of the sectional tool.

 

We also supply clamping punch holders for Promecam tooling system (press brake).

 

During the tool changing these punch holders make the operator’s work easier and more convenient (in comparison to standard punch holders which require fixation using bolts and an additional hex tool for loosening the bolts), this results in higher productivity, cutting expenses and time spent on preparatory actions when bending.

 

 

Clamping is carried out mechanically, does not need the installation of hydraulic or pneumatic systems. Punchholder components are all nickel plated and tempered to increase durability.

 

The 3 positions for the clamping lever are:

 

  • 90 degrees for positioning the punch,
  • 45 degrees to hold the punch without locking it,
  • Put the lever in the vertical position to lock the tool.

 

We also provide consulting services on bending technology, assistance in calculating effort and tool selection, based both on customer’s special requirements and/or catalogues of other manufacturers.

Main menu